Greater Tulsa Area Classifieds Moderated Newsgroup > Broken Arrow
> Children
> Liftmaster sentex SL570 commercial slide gate operator
Liftmaster sentex SL570 commercial slide gate operator
Please E-mail us at ****@fastaccesssecurity.com for additional information about this Elite operator or any other Elite operator. We stock ALL models of Elite gate operators in addition to ALL accessories including loops, loop detectors, transmitters, receivers, magnetic gate locks and photoelectric safety sensors!!!!
Price is for 1 NEW / In Original Box/Crate "LiftMaster" SL-570 1 HP Commercial Slide Gate Operator !!!!! 2 Year Warranty from Chamberlain.
PLEASE SPECIFY DESIRED VOLTS AND PH!
1/2 hp Models (for gates up to 1200 lbs./40') AND 3/4 hp Models (for gates up to 1500 lbs./45') are available upon request. Inquiries can be sent to ****@fastaccesssecurity.com
The LiftMaster® SL570 is a reliable continuous-duty operator for use on heavy-gate applications in commercial and light industrial locations. This resilient operator offers many standard features such as dual gate operation, sequenced access management, diagnostic LEDs, and more. The SL570 supports gate lengths up to 50 feet (if overhead) and gate weights up to 1,800 pounds, making it ideal for commercial and light industrial installations (18 Cycles per hour).
THE SL570 SERIES SLIDE GATE OPERATORS
* Inherent obstruction sensing
* External obstruction sensing
* Advanced dual gate operation
* Sequenced access management
SL570 Slide Gate Operator (heavy duty)
Reliable continuous-duty operator
This resilient operator offers many standard features such as dual gate operation, sequenced access management, diagnostic LEDs and more. The SL 570 supports gate lengths up to 50 feet and gate weights up to 1,800 pounds, making it ideal for commercial and light industrial installations.
Gate logic board provides many enhanced and exclusive features
- Fully Adjustable Inherent Obstruction Detection System
- Advanced Dual Gate Operation
- Sequenced Access Management (SAM) System
- Industrial Surge and Spike Protection
- Digital Logic Control Allowing for Long Control Lines of Over 1,000 Feet
- Separate Open and Close External Sensor Inputs
- 17 LEDs to Ease Installation and Speed Diagnostics
Operator speed - 12 inches per second
Power: 115/208/230 VAC, Single phase - 60 Hz
208/230/460/575 VAC, Three phase - 60 Hz
UL listed - UL991; UL325 Class I, II, III, IV
First stage 3.5:1 - Belt reduction &
Second stage 5.3:1 - Chain reduction
Motor: 1/2 to 1 HP continuous duty motor
Enclosure: weather resistant, lockable, 16-gauge steel
Chain: #50 nickel plated (25 feet supplied)
- Thermostat-Controlled Heater
HP Max gate weight Max gate width
1/2 1200 lbs. 40 ft. 25 ft. 22
3/4 1500 lbs. 45 ft. 30 ft. 22
This unit's internal obstruction sensing system offers a single force adjustment for both the open and closed directions. If the gate strikes an obstruction, a closing gate will reverse to open and an opening gate will reverse to close.
Input connections are provided for external contact and non-contact sensors, such as photo eyes and edge devices.
This convenient 2-wire system allows the operation of 2 separate gate operators in unison at a single entrance. This advanced system provides the added convenience of connecting accessories to either operator.
The sequenced access management (SAM) system provides the capability to sequentially control the operator in tandem with a barrier gate.
Supports long-distance control wiring runs of over 1,000 feet, providing you greater flexibility of gate operator site placement.
Operator input, status and diagnostic LEDs simplify setup and troubleshooting.
UL325-compliant entrapment warning alarm has the ability to be set for pre-operation warning. This will provide a 3-second warning prior to and during gate movement.
A full range of inputs are available to support exit, shadow and interrupt loop detectors.
Adjustable timer can be set from 1 to 180 seconds. The unit will automatically reset upon receiving any additional open commands.
Protects against damage to the gate and operator by limiting the unit's run time to 120 seconds.
This 1-button station will halt movement of the operator in an emergency situation and comes standard in an outdoor weather- tight enclosure.
A dedicated control relay is provided to activate and deactivate an optional magnetic lock for securing the gate.
Control inputs allow the connection of a full range of optional external devices like loop detectors, telephone entry systems, access control systems and radio receivers.
The mechanical braking system adds substantial gate position control at all points in travel. This solenoid-actuated brake system also prevents the gate from being back-driven.
All driven limit nuts switches are fully adjustable, adding considerable convenience to unit installation and maintenance.
Specially designed circuitry provides excellent protection from external spikes or surges.
Ensures that manual operation is possible during emergencies and maintenance work.
Gate operator installations should be completed by a qualified installer only. Fast Access Security Corp. assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details.
