Greater Tulsa Area Classifieds Moderated Newsgroup > Broken Arrow
> Industrial Equipment
> Keithley 705 ieee compatible scanner mainframe
Keithley 705 ieee compatible scanner mainframe
Test Equipment Solutions Today
The Keithley 705 is a low cost IEEE compatible scanner. The basic mainframe can accommodate two plug-in scanner cards. Each card can have different pole configurations. In the l-pole configuration the card has 20 channels, The 4-pole configuration allows 10 channels with two cards (for four-wire ohms). Using the "daisy chain" method the Keithley 705, along with four additional Keithley 705's, can provide up to 100 2-pole channels. The time and the date are kept internally with a battery backed up clock allowing time dependent procedures to be performed. The controls on the front panel allow opening a selected channel, closing the channel, scanning between a selectable first and last channel, selectable scan rate and mode. There are 13 internal programs that are accessible from the front panel. The programs can select primary address, dwell time, store a relay set up, recall the stored relay set up, control the digital l/O port, switch from International to American date format, control interval stop/start and select I-, 2- or 4 pole measurement modes. The Keithley 705 Scanner adheres to standard IEEE-488 interface bus protocol. This enables the Keithley 705 to be incorporated into any measurement system that uses programmed control through the IEEE-488 bus.
Guaranteed against DOA. We offer a 30day warranty and 5-day acceptance period. No manuals or accessories are included unless shown in picture. Any questions on this unit call (***) 889-8378, ask for Cameron.
International orders Bank Wire Transfer only.
The foregoing warranty is in lieu and exclusive of all other warranties, whether express, implied or statutory, oral or written. Unless otherwise agreed in writing, Test Equipment Solutions Today does not warrant the merchantability of the components furnished or the equipment sold, or its fitness or suitability for any specific application or use. Test Equipment Solutions Today shall not be liable for any damage or losses regardless of reason or cause for its failure to discover, report, repair or modify latent defects or defects inherent in the design of the equipment.
