Greater Tulsa Area Classifieds Moderated Newsgroup > Red Fork
> Automobiles
> Repair shop items
> Shop Tools
> New handscraft motor removed from display 6 vdc operate
New handscraft motor removed from display 6 vdc operate
Handscraft Motor removed from NEW display 6 VDC Operate
Originally designed for continuous operation for a POP/ POS display.
I have removed the motor from the display.
Due to the gear radio, the motor has quite a bit of power for its small size.
The battery pack was designed to have a slide to activate the display, (this serves as a switch), see pictures.
The motor is geared down through several gears internal to the black case.
Presently the motor rotates about one revolution every 10 seconds.
The motor shaft is 3/8" in length, 1/8" thick, and is slotted to provide positive contact with a screw.
The battery holder will accept 4 "D" batteries to provide power.
Hankscraft's Display Division designs and fabricates custom motors along with providing all the necessary components to turn, wave, twirl, or rock parts of your POP/ POS display.
Research shows that adding motion increases sales by more than 50% over static displays....making the decision to add motion an easy one.
See pictures for additional information.
**** DO NOT USE "ASK SELLER A QUESTION LINK" TO CORRESPOND WITH ME.
**** I AM MORE THAN HAPPY TO ANSWER ANY QUESTIONS! YOU MAY EMAIL ME DIRECTLY USING: ****@yahoo.com
*************************************************************************************************************
***************************************************************************************************************************
***************************************************************************************************************************
This Ad created with The Poster Toaster.
