Greater Tulsa Area Classifieds Moderated Newsgroup > Sapulpa
> Children
> Safety
> Tencor p-11 long scan surface profiler
Tencor p-11 long scan surface profiler
Tencor P-11 Long Scan Surface Profiler
KLA-TENCOR P-11 LONG SCAN SURFACE PROFILER
Information taken from manufacturer website. Ours is older and Dos Based. Year New - 1995/96
Computerized, highly sensitive Surface Profiler that measures roughness, waviness, step height, and other surface characteristics in a variety of applications.
It features the ability to measure micro-roughness with up to 0.5Ã… (0.002 min.) resolution over short distances as well as waviness over a full, 205-mm (8.1-in.) scan.
The built-in PC computing power offers precise, automatic measurement capability with the convenience and ease of use of Microsoft Windows-based software control and data analysis.
The KLA-Tencor P-11 can profile a variety of materials, including
* Precision-machined and polished surfaces
* Ceramics for micro-electronics
* Glass for flat panel displays
* Measurement of vertical features ranging from under 100Å (0.4 min.) to approximately 300 µm (11 mils), with a vertical resolution of 0.5, 2, or 10Å. Vertical range for the optional Extended Range MicroHead xr is from under 100Å to 1000mm with 1-, 10-, or 80-Å resolution; for the optional Low-Force MicroHead, from under 50Å to 130 mm at 0.5-, 2-, and 10-Å resolution.
* Photo-realistic rendering of the scan data in three dimensions for extended surface analysis.
* A virtually unlimited number of data points per profile guarantee that the horizontal resolution is limited by the stylus radius and not by the number of data points.
* Automatic computation of the average, maximum and center stress of surface films in MPa for enhanced yield.
* Measurement of many roughness and waviness parameters, with user-selectable cutoff filters to isolate roughness and waviness.
* Ability to fit and level a scan, allowing accurate step height measurements on curved surfaces.
* Ability to detect the edge or apex of a profile feature, allowing automated data analysis relative to the feature.
* Ability to repeat a scan up to ten times and automatically calculate the average, thereby minimizing the effects of environmental noise on measurements.
Freight costs to be quoted at time of sale from zip code 06787.
All freight costs to be paid by the purchaser.
Should you have questions, please contact Joe at (***)-484-4449.
Or email ****@globalmachinebrokers.com .
